Image 1 of 1
Thermo King Aluminum Blind Rivet Size 1/8 x 1/4 552270
Official OEM Thermo King parts catalog entry for the Thermo King Rivet Blind 552270 1/8 x 1/4 AL, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Rivet Blind 552270 1/8 x 1/4 AL delivers OEM-grade fastening for temperature-controlled fleets and transport refrigeration assemblies. This aluminum blind rivet supports secure, single-sided installation where access is limited, preserving assembly integrity across demanding reefer operations.
Thermo King refrigeration system components rely on durable fasteners to maintain consistent temperature control and uptime. West Texas Thermo King specifies this rivet for use where lightweight corrosion resistance and dependable clamp-up are required in refrigeration panels, trim, and bracket mounting.
Key Features & Customer Benefits
- OEM Thermo King Part Number 552270 – Ensures correct fit and traceability for service records and fleet maintenance.
- Aluminum Body (AL) – Provides corrosion resistance and reduced component weight for long-term service in refrigerated environments.
- 1/8 x 1/4 Size – Matches common blind-rivet requirements for panel fastening and thin-gauge mounting in reefer assemblies.
- Blind Installation – Allows secure fastening from one side where rear-side access is restricted, speeding field repairs and installations.
- Consistent Clamp-Up – Supports reliable joint integrity to maintain temperature control and reduce air infiltration in refrigeration enclosures.
- Fleet-Ready Supply – Small, serviceable component that supports quick replacement during scheduled maintenance to maximize uptime.
Product Details
| Part Number | 552270 |
| Product Name | Thermo King Rivet Blind 552270 1/8 x 1/4 AL |
| Material | Aluminum (AL) |
| Size | 1/8 x 1/4 (diameter x length) |
| Type | Blind Rivet (single-sided installation) |
| Typical Use | Fastening panels, brackets, trim on Thermo King transport refrigeration assemblies |
Efficiency & Sustainability
This aluminum blind rivet supports lightweight assembly practices that contribute to overall vehicle mass reduction and fuel-efficient cooling operation. Use of OEM-specified fasteners aligns with Thermo King service standards and supports Smart Reefer SR-4 maintenance workflows, helping fleets preserve temperature control efficiency and compliance-minded upkeep.
Installation & Maintenance Tips
Install with a calibrated blind-rivet tool sized for 1/8 rivets and verify proper mandrel break and clamp-up. Inspect rivet joints during scheduled maintenance intervals and replace any fasteners that show corrosion or loss of clamp. Always follow Thermo King service bulletins and use OEM fasteners for warranty and service consistency.
Real-World Applications
Use the Thermo King Rivet Blind 552270 across reefer trailer bodies, refrigerated truck enclosures, condenser and evaporator mountings, and other transport refrigeration assemblies where single-sided fastening is required. This part supports fleet uptime and precision fastening in the Southwest climate and beyond.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information: contact West Texas Thermo King for confirmation and assistance.
Frequently Asked Questions
Q: Is this rivet compatible with Thermo King units?
A: Yes. The Thermo King Rivet Blind 552270 is an OEM fastener intended for use in Thermo King refrigeration assemblies and reefer trailer components where a 1/8 x 1/4 aluminum blind rivet is specified.
Q: What tool is recommended for installation?
A: Use a blind-rivet installation tool rated for 1/8-inch rivets and follow the tool manufacturer’s guidance to ensure consistent mandrel break and proper clamp-up.
Q: How does this part support fleet uptime?
A: Quick, single-sided installation and corrosion resistance reduce repair time and help maintain sealed joints that preserve temperature control integrity.
Q: Where can fleets in West Texas get this part installed?
A: West Texas Thermo King offers parts and certified installation services in Amarillo, Lubbock, Odessa, and throughout the Permian Basin region.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King Rivet Blind 552270 1/8 x 1/4 AL, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Rivet Blind 552270 1/8 x 1/4 AL delivers OEM-grade fastening for temperature-controlled fleets and transport refrigeration assemblies. This aluminum blind rivet supports secure, single-sided installation where access is limited, preserving assembly integrity across demanding reefer operations.
Thermo King refrigeration system components rely on durable fasteners to maintain consistent temperature control and uptime. West Texas Thermo King specifies this rivet for use where lightweight corrosion resistance and dependable clamp-up are required in refrigeration panels, trim, and bracket mounting.
Key Features & Customer Benefits
- OEM Thermo King Part Number 552270 – Ensures correct fit and traceability for service records and fleet maintenance.
- Aluminum Body (AL) – Provides corrosion resistance and reduced component weight for long-term service in refrigerated environments.
- 1/8 x 1/4 Size – Matches common blind-rivet requirements for panel fastening and thin-gauge mounting in reefer assemblies.
- Blind Installation – Allows secure fastening from one side where rear-side access is restricted, speeding field repairs and installations.
- Consistent Clamp-Up – Supports reliable joint integrity to maintain temperature control and reduce air infiltration in refrigeration enclosures.
- Fleet-Ready Supply – Small, serviceable component that supports quick replacement during scheduled maintenance to maximize uptime.
Product Details
| Part Number | 552270 |
| Product Name | Thermo King Rivet Blind 552270 1/8 x 1/4 AL |
| Material | Aluminum (AL) |
| Size | 1/8 x 1/4 (diameter x length) |
| Type | Blind Rivet (single-sided installation) |
| Typical Use | Fastening panels, brackets, trim on Thermo King transport refrigeration assemblies |
Efficiency & Sustainability
This aluminum blind rivet supports lightweight assembly practices that contribute to overall vehicle mass reduction and fuel-efficient cooling operation. Use of OEM-specified fasteners aligns with Thermo King service standards and supports Smart Reefer SR-4 maintenance workflows, helping fleets preserve temperature control efficiency and compliance-minded upkeep.
Installation & Maintenance Tips
Install with a calibrated blind-rivet tool sized for 1/8 rivets and verify proper mandrel break and clamp-up. Inspect rivet joints during scheduled maintenance intervals and replace any fasteners that show corrosion or loss of clamp. Always follow Thermo King service bulletins and use OEM fasteners for warranty and service consistency.
Real-World Applications
Use the Thermo King Rivet Blind 552270 across reefer trailer bodies, refrigerated truck enclosures, condenser and evaporator mountings, and other transport refrigeration assemblies where single-sided fastening is required. This part supports fleet uptime and precision fastening in the Southwest climate and beyond.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information: contact West Texas Thermo King for confirmation and assistance.
Frequently Asked Questions
Q: Is this rivet compatible with Thermo King units?
A: Yes. The Thermo King Rivet Blind 552270 is an OEM fastener intended for use in Thermo King refrigeration assemblies and reefer trailer components where a 1/8 x 1/4 aluminum blind rivet is specified.
Q: What tool is recommended for installation?
A: Use a blind-rivet installation tool rated for 1/8-inch rivets and follow the tool manufacturer’s guidance to ensure consistent mandrel break and proper clamp-up.
Q: How does this part support fleet uptime?
A: Quick, single-sided installation and corrosion resistance reduce repair time and help maintain sealed joints that preserve temperature control integrity.
Q: Where can fleets in West Texas get this part installed?
A: West Texas Thermo King offers parts and certified installation services in Amarillo, Lubbock, Odessa, and throughout the Permian Basin region.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.