Image 1 of 1
Thermo King Fuel Pre-Strainer for Transport Refrigeration 100436
Official OEM Thermo King parts catalog entry for the Thermo King Fuel Pre-Strainer 100436, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Fuel Pre-Strainer 100436 optimizes fuel integrity for temperature-controlled transport by capturing coarse debris before it reaches the primary filter. Designed to protect Thermo King refrigeration systems, this component enhances uptime and reduces unscheduled service on reefer trailers and transport refrigeration units.
Thermo King refrigeration system compatibility and serviceability deliver dependable protection for fleets operating throughout West Texas, including Amarillo, Lubbock, Odessa, and the Permian Basin.
- Coarse Contaminant Capture – Reduces load on primary fuel filters to extend filter life and minimize clog-related downtime.
- Fleet Uptime Protection – Prevents debris from entering fuel pumps and injectors, supporting continuous temperature control on long hauls.
- OEM-Aligned Design – Matches Thermo King installation practices to ensure secure fitment and predictable service intervals.
- Two-Stage Filtration Support – Works upstream of fine micron filters to maintain consistent fuel flow and engine reliability.
- Simplified Maintenance – Accessible placement supports fast inspection and service during routine fuel system checks.
Product Details
The Thermo King Fuel Pre-Strainer 100436 captures larger particulates before they reach the main fuel filter, protecting pumps and injectors on Thermo King refrigeration units. This pre-strainer commonly pairs with downstream fuel filters (for example, part numbers used in Thermo King fuel systems) to create a two-stage filtration approach that preserves fuel-system integrity. Installation follows Thermo King OEM guidance; fitment typically applies across transport refrigeration platforms where a pre-strainer is specified by the manufacturer.
Efficiency & Sustainability
By removing coarse contaminants upstream of the primary filter, the Fuel Pre-Strainer 100436 supports fuel-efficient cooling and reliable temperature control. Reduced filter changes and fewer fuel-system repairs improve lifecycle efficiency and lower environmental impact from parts disposal and service trips. This component aligns with Thermo King best practices for Smart Reefer SR-4 and other modern platforms that prioritize long-term operational efficiency.
Installation & Maintenance Tips
Install the Fuel Pre-Strainer 100436 following Thermo King service procedures and use OEM clamps and fittings for secure connections. Inspect the pre-strainer during scheduled fuel system maintenance and replace it whenever inspection shows debris accumulation or service intervals indicate replacement. Maintain records of fluid and filter service to preserve fleet reliability and simplify diagnostics.
Real-World Applications
The Fuel Pre-Strainer 100436 is ideal for reefer trailers, refrigerated trucks, and transport refrigeration packages that operate in dusty or variable fuel-quality environments. It protects critical fuel-system components on long-haul routes across West Texas, the Permian Basin, and Southwest freight corridors, supporting consistent temperature control for perishable cargo.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information or reach the service department for confirmation.
Frequently Asked Questions
Q: Is this pre-strainer compatible with Thermo King Precedent and S-Series units?
A: The Fuel Pre-Strainer 100436 supports Thermo King platforms where a pre-strainer is specified; refer to unit service documentation or contact West Texas Thermo King for application confirmation.
Q: How does the pre-strainer improve fleet reliability?
A: By trapping coarse debris ahead of the main fuel filter, the pre-strainer reduces clogging, extends filter life, and lowers the risk of fuel-pump or injector issues that cause refrigeration shutdowns.
Q: How often should the pre-strainer be inspected?
A: Inspect the pre-strainer during routine fuel system maintenance intervals and replace it when debris accumulation or service schedules indicate replacement.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King Fuel Pre-Strainer 100436, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Fuel Pre-Strainer 100436 optimizes fuel integrity for temperature-controlled transport by capturing coarse debris before it reaches the primary filter. Designed to protect Thermo King refrigeration systems, this component enhances uptime and reduces unscheduled service on reefer trailers and transport refrigeration units.
Thermo King refrigeration system compatibility and serviceability deliver dependable protection for fleets operating throughout West Texas, including Amarillo, Lubbock, Odessa, and the Permian Basin.
- Coarse Contaminant Capture – Reduces load on primary fuel filters to extend filter life and minimize clog-related downtime.
- Fleet Uptime Protection – Prevents debris from entering fuel pumps and injectors, supporting continuous temperature control on long hauls.
- OEM-Aligned Design – Matches Thermo King installation practices to ensure secure fitment and predictable service intervals.
- Two-Stage Filtration Support – Works upstream of fine micron filters to maintain consistent fuel flow and engine reliability.
- Simplified Maintenance – Accessible placement supports fast inspection and service during routine fuel system checks.
Product Details
The Thermo King Fuel Pre-Strainer 100436 captures larger particulates before they reach the main fuel filter, protecting pumps and injectors on Thermo King refrigeration units. This pre-strainer commonly pairs with downstream fuel filters (for example, part numbers used in Thermo King fuel systems) to create a two-stage filtration approach that preserves fuel-system integrity. Installation follows Thermo King OEM guidance; fitment typically applies across transport refrigeration platforms where a pre-strainer is specified by the manufacturer.
Efficiency & Sustainability
By removing coarse contaminants upstream of the primary filter, the Fuel Pre-Strainer 100436 supports fuel-efficient cooling and reliable temperature control. Reduced filter changes and fewer fuel-system repairs improve lifecycle efficiency and lower environmental impact from parts disposal and service trips. This component aligns with Thermo King best practices for Smart Reefer SR-4 and other modern platforms that prioritize long-term operational efficiency.
Installation & Maintenance Tips
Install the Fuel Pre-Strainer 100436 following Thermo King service procedures and use OEM clamps and fittings for secure connections. Inspect the pre-strainer during scheduled fuel system maintenance and replace it whenever inspection shows debris accumulation or service intervals indicate replacement. Maintain records of fluid and filter service to preserve fleet reliability and simplify diagnostics.
Real-World Applications
The Fuel Pre-Strainer 100436 is ideal for reefer trailers, refrigerated trucks, and transport refrigeration packages that operate in dusty or variable fuel-quality environments. It protects critical fuel-system components on long-haul routes across West Texas, the Permian Basin, and Southwest freight corridors, supporting consistent temperature control for perishable cargo.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information or reach the service department for confirmation.
Frequently Asked Questions
Q: Is this pre-strainer compatible with Thermo King Precedent and S-Series units?
A: The Fuel Pre-Strainer 100436 supports Thermo King platforms where a pre-strainer is specified; refer to unit service documentation or contact West Texas Thermo King for application confirmation.
Q: How does the pre-strainer improve fleet reliability?
A: By trapping coarse debris ahead of the main fuel filter, the pre-strainer reduces clogging, extends filter life, and lowers the risk of fuel-pump or injector issues that cause refrigeration shutdowns.
Q: How often should the pre-strainer be inspected?
A: Inspect the pre-strainer during routine fuel system maintenance intervals and replace it when debris accumulation or service schedules indicate replacement.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.