Official OEM Thermo King parts catalog entry for the Insulation 1/16 x 12 x 16 in (Part 119352), verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Insulation 1/16 x 12 x 16 in (Part 119352) provides precise, OEM-grade thermal protection for temperature-critical assemblies inside Thermo King refrigeration systems. This thin insulation panel helps maintain consistent temperature control and supports fuel-efficient cooling across fleet refrigeration applications.
The Thermo King Insulation 1/16 x 12 x 16 in is a purpose-made, thin insulation panel intended for targeted thermal and acoustic protection inside refrigerated units and transport refrigeration assemblies. West Texas Thermo King supplies this component as a certified Thermo King dealership item, ensuring dependable fit and consistent material performance for service and repair needs.
Part Number: 119352. Dimensions: 1/16 in (thickness) x 12 in (width) x 16 in (length). This Insulation 1/16 x 12 x 16 in is an OEM-specified thin sheet designed for targeted thermal and acoustic applications within Thermo King refrigeration units and reefer trailer component areas.
This Thermo King insulation component supports efficient temperature control and helps reduce compressor runtime by minimizing localized heat ingress. Using OEM Thermo King parts aligns with maintenance strategies for Smart Reefer SR-4 systems and contributes to overall fuel-efficient cooling and environmental performance objectives commonly pursued by carriers operating in West Texas and the Permian Basin.
Install using OEM-approved adhesives or fasteners and verify secure placement to avoid air gaps. Inspect insulation panels during scheduled service intervals and replace damaged or compressed pieces immediately to maintain consistent thermal performance. Use OEM clamps and retainers when reassembling adjacent components.
The Insulation 1/16 x 12 x 16 in fits targeted locations within refrigerated trucks, reefer trailers, and transport refrigeration assemblies where space is limited but thermal protection is required—examples include lining small access doors, insulating around sensor arrays, or protecting refrigerant lines and electrical harnesses. Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information or reach out to the service department for confirmation.
Q: Is this insulation compatible with Thermo King Precedent or S-610 series units?
A: Yes. This OEM insulation panel fits targeted internal locations used across Thermo King transport refrigeration units, including applications found in Precedent and S-610 series equipment where compact insulation is required.
Q: How is the panel installed?
A: Install the panel using OEM-approved adhesives or mechanical fasteners, ensure full contact without air gaps, and verify surrounding seals for continuous thermal integrity.
Q: When should the insulation be replaced?
A: Replace if the panel shows compression, tears, or moisture intrusion during routine inspections to preserve temperature control and reduce additional wear on refrigeration components.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Insulation 1/16 x 12 x 16 in (Part 119352), verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Insulation 1/16 x 12 x 16 in (Part 119352) provides precise, OEM-grade thermal protection for temperature-critical assemblies inside Thermo King refrigeration systems. This thin insulation panel helps maintain consistent temperature control and supports fuel-efficient cooling across fleet refrigeration applications.
The Thermo King Insulation 1/16 x 12 x 16 in is a purpose-made, thin insulation panel intended for targeted thermal and acoustic protection inside refrigerated units and transport refrigeration assemblies. West Texas Thermo King supplies this component as a certified Thermo King dealership item, ensuring dependable fit and consistent material performance for service and repair needs.
Part Number: 119352. Dimensions: 1/16 in (thickness) x 12 in (width) x 16 in (length). This Insulation 1/16 x 12 x 16 in is an OEM-specified thin sheet designed for targeted thermal and acoustic applications within Thermo King refrigeration units and reefer trailer component areas.
This Thermo King insulation component supports efficient temperature control and helps reduce compressor runtime by minimizing localized heat ingress. Using OEM Thermo King parts aligns with maintenance strategies for Smart Reefer SR-4 systems and contributes to overall fuel-efficient cooling and environmental performance objectives commonly pursued by carriers operating in West Texas and the Permian Basin.
Install using OEM-approved adhesives or fasteners and verify secure placement to avoid air gaps. Inspect insulation panels during scheduled service intervals and replace damaged or compressed pieces immediately to maintain consistent thermal performance. Use OEM clamps and retainers when reassembling adjacent components.
The Insulation 1/16 x 12 x 16 in fits targeted locations within refrigerated trucks, reefer trailers, and transport refrigeration assemblies where space is limited but thermal protection is required—examples include lining small access doors, insulating around sensor arrays, or protecting refrigerant lines and electrical harnesses. Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information or reach out to the service department for confirmation.
Q: Is this insulation compatible with Thermo King Precedent or S-610 series units?
A: Yes. This OEM insulation panel fits targeted internal locations used across Thermo King transport refrigeration units, including applications found in Precedent and S-610 series equipment where compact insulation is required.
Q: How is the panel installed?
A: Install the panel using OEM-approved adhesives or mechanical fasteners, ensure full contact without air gaps, and verify surrounding seals for continuous thermal integrity.
Q: When should the insulation be replaced?
A: Replace if the panel shows compression, tears, or moisture intrusion during routine inspections to preserve temperature control and reduce additional wear on refrigeration components.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
