Image 1 of 1
Thermo King OEM Temperature Sensor Clamp for Transport 097070
Official OEM Thermo King parts catalog entry for the Thermo King 097070 Sensor Clamp, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King 097070 Sensor Clamp secures temperature sensors and probe bulbs in transport refrigeration installations to ensure steady, repeatable readings for critical cold-chain applications. This clamp supports accurate placement in Thermo King refrigeration system applications and reduces sensor movement that can degrade temperature control.
West Texas Thermo King, a certified Thermo King dealership, specifies this Sensor Clamp to maintain uptime and consistent temperature control across reefer trailer and truck fleets operating in Amarillo, Lubbock, Odessa, and the Permian Basin.
- Secure Retention – Holds sensor bulbs and probes firmly in position to prevent drift and vibration-induced error during transit.
- Consistent Temperature Readings – Promotes intimate sensor contact with mounting points or air paths for precise temperature control.
- OEM Compatibility – Designed to integrate with Thermo King transport refrigeration components and typical sensor mounting locations on evaporators and roof brackets.
- Service-Friendly – Enables quick sensor replacement or adjustment during routine maintenance to minimize downtime.
- Durability Focus – Engineered for refrigeration environments to support long service intervals and reliable fleet operation.
Product Details
The Thermo King 097070 Sensor Clamp is an OEM Thermo King component intended to secure temperature sensors and probe assemblies within transport refrigeration systems. It provides stable mounting for sensor bulbs or probes near evaporator coils, condenser housings, receiver drier brackets, or roof-mounted sensor locations. Use this clamp wherever a secure, vibration-resistant sensor fitment is required to maintain control accuracy in Thermo King units including common platform models and transport refrigeration installations.
Efficiency & Sustainability
Accurate sensor placement supports efficient compressor cycles and precise temperature control, contributing to reduced fuel consumption and improved load protection. This clamp plays a role in system-level efficiency improvements on Smart Reefer SR-4 platforms and other Thermo King control systems that prioritize fuel-efficient cooling and regulatory compliance.
Installation & Maintenance Tips
Install the Thermo King 097070 Sensor Clamp using OEM-recommended hardware and torque values. Inspect clamp integrity and sensor positioning during scheduled maintenance intervals to ensure consistent readings. Use OEM replacement sensors and retainers to maintain system calibration and extend service life.
Real-World Applications
This Sensor Clamp is ideal for reefer trailers, refrigerated trucks, and transport refrigeration units where secure sensor placement ensures temperature stability for perishable cargo. Typical mounting locations include evaporator assemblies, roof brackets, and condenser housings on Thermo King systems used across regional and long-haul operations.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting reliability and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information or contact the service department directly at https://www.trailerservicesofwesttexas.com/contact.
Frequently Asked Questions
Q: Is the Thermo King 097070 Sensor Clamp compatible with common Thermo King evaporators?
A: Yes. This clamp is intended for secure mounting of sensor bulbs and probes at standard evaporator and condenser mounting points used in Thermo King transport refrigeration systems.
Q: How does using the correct sensor clamp affect fleet performance?
A: Proper sensor retention minimizes measurement error, supports precise temperature control, and reduces unnecessary run time—improving fuel efficiency and cargo protection across fleets.
Q: Can technicians install this clamp during routine service intervals?
A: Yes. Installation and inspection of sensor clamps are standard tasks for certified technicians during preventive maintenance to ensure ongoing system accuracy.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King 097070 Sensor Clamp, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King 097070 Sensor Clamp secures temperature sensors and probe bulbs in transport refrigeration installations to ensure steady, repeatable readings for critical cold-chain applications. This clamp supports accurate placement in Thermo King refrigeration system applications and reduces sensor movement that can degrade temperature control.
West Texas Thermo King, a certified Thermo King dealership, specifies this Sensor Clamp to maintain uptime and consistent temperature control across reefer trailer and truck fleets operating in Amarillo, Lubbock, Odessa, and the Permian Basin.
- Secure Retention – Holds sensor bulbs and probes firmly in position to prevent drift and vibration-induced error during transit.
- Consistent Temperature Readings – Promotes intimate sensor contact with mounting points or air paths for precise temperature control.
- OEM Compatibility – Designed to integrate with Thermo King transport refrigeration components and typical sensor mounting locations on evaporators and roof brackets.
- Service-Friendly – Enables quick sensor replacement or adjustment during routine maintenance to minimize downtime.
- Durability Focus – Engineered for refrigeration environments to support long service intervals and reliable fleet operation.
Product Details
The Thermo King 097070 Sensor Clamp is an OEM Thermo King component intended to secure temperature sensors and probe assemblies within transport refrigeration systems. It provides stable mounting for sensor bulbs or probes near evaporator coils, condenser housings, receiver drier brackets, or roof-mounted sensor locations. Use this clamp wherever a secure, vibration-resistant sensor fitment is required to maintain control accuracy in Thermo King units including common platform models and transport refrigeration installations.
Efficiency & Sustainability
Accurate sensor placement supports efficient compressor cycles and precise temperature control, contributing to reduced fuel consumption and improved load protection. This clamp plays a role in system-level efficiency improvements on Smart Reefer SR-4 platforms and other Thermo King control systems that prioritize fuel-efficient cooling and regulatory compliance.
Installation & Maintenance Tips
Install the Thermo King 097070 Sensor Clamp using OEM-recommended hardware and torque values. Inspect clamp integrity and sensor positioning during scheduled maintenance intervals to ensure consistent readings. Use OEM replacement sensors and retainers to maintain system calibration and extend service life.
Real-World Applications
This Sensor Clamp is ideal for reefer trailers, refrigerated trucks, and transport refrigeration units where secure sensor placement ensures temperature stability for perishable cargo. Typical mounting locations include evaporator assemblies, roof brackets, and condenser housings on Thermo King systems used across regional and long-haul operations.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting reliability and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information or contact the service department directly at https://www.trailerservicesofwesttexas.com/contact.
Frequently Asked Questions
Q: Is the Thermo King 097070 Sensor Clamp compatible with common Thermo King evaporators?
A: Yes. This clamp is intended for secure mounting of sensor bulbs and probes at standard evaporator and condenser mounting points used in Thermo King transport refrigeration systems.
Q: How does using the correct sensor clamp affect fleet performance?
A: Proper sensor retention minimizes measurement error, supports precise temperature control, and reduces unnecessary run time—improving fuel efficiency and cargo protection across fleets.
Q: Can technicians install this clamp during routine service intervals?
A: Yes. Installation and inspection of sensor clamps are standard tasks for certified technicians during preventive maintenance to ensure ongoing system accuracy.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
