Thermo King Precision Refrigeration Shim .01 773158
Official OEM Thermo King parts catalog entry for the Thermo King Shim .01 773158, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Shim .01 773158 delivers precise spacing and alignment for Thermo King refrigeration components, ensuring consistent operation and reduced wear in temperature-control systems. This thin precision shim supports accurate assembly and dependable mechanical clearance for transport refrigeration fleets.
West Texas Thermo King lists this OEM shim for technicians who demand exact fitment and predictable serviceability across Thermo King refrigeration platforms used in reefer trailers and refrigerated trucks.
- Precision Alignment – Ensures correct component clearance to reduce vibration and premature wear for longer service intervals.
- OEM Compatibility – Manufactured to Thermo King standards for consistent fit with factory assemblies and service procedures.
- Durable Construction – Engineered for the mechanical environment of transport refrigeration to maintain spacing under load.
- Serviceability – Enables technicians to achieve OEM-specified tolerances during routine maintenance and repairs, supporting uptime.
- Fleet Efficiency – Proper alignment helps maintain fuel-efficient cooling and reliable temperature control across operations.
Product Details
The Thermo King Shim .01 773158 is a precision shim used to adjust spacing and alignment in Thermo King refrigeration assemblies. Technicians install it where small, accurate spacing corrections are required to restore OEM clearances and support reliable mechanical operation. Use per Thermo King service instructions for intended placement and torque specifications.
Efficiency & Sustainability
Maintaining correct component alignment with OEM shims supports efficient heat transfer and consistent temperature control in refrigerated transport. Properly maintained systems reduce cycling and fuel consumption, contributing to lower operating emissions and improved uptime. This component supports Thermo King service practices for platforms such as Precedent and Smart Reefer configurations when installed according to OEM guidance.
Installation & Maintenance Tips
Install the shim during scheduled service or when measurements indicate clearance adjustment. Use OEM fasteners and torque values to secure components and prevent movement. Inspect shim placement during routine maintenance intervals and replace if deformation or corrosion appears. Follow Thermo King service manuals for step-by-step procedures.
Real-World Applications
The Thermo King Shim .01 773158 is ideal for reefer trailers, refrigerated straight trucks, and multi-temperature transport units where precise mechanical spacing extends component life and maintains temperature control. It performs in fleet service across regional routes and long-haul operations.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information via the contact page or call the service department for confirmation.
Frequently Asked Questions
Q: Is this shim compatible with Thermo King Precedent units?
A: Yes. The Thermo King Shim .01 773158 fits Thermo King assemblies where the OEM part number is specified; follow Thermo King service documentation for exact placement.
Q: When should a technician install this shim?
A: Install during service when measured clearances fall outside OEM tolerance or when reassembling components that require precise spacing to restore correct alignment.
Q: Does installing this shim affect temperature control?
A: Proper spacing and alignment help maintain reliable temperature control by reducing vibration and wear, which supports consistent system operation and fuel-efficient cooling.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King Shim .01 773158, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Shim .01 773158 delivers precise spacing and alignment for Thermo King refrigeration components, ensuring consistent operation and reduced wear in temperature-control systems. This thin precision shim supports accurate assembly and dependable mechanical clearance for transport refrigeration fleets.
West Texas Thermo King lists this OEM shim for technicians who demand exact fitment and predictable serviceability across Thermo King refrigeration platforms used in reefer trailers and refrigerated trucks.
- Precision Alignment – Ensures correct component clearance to reduce vibration and premature wear for longer service intervals.
- OEM Compatibility – Manufactured to Thermo King standards for consistent fit with factory assemblies and service procedures.
- Durable Construction – Engineered for the mechanical environment of transport refrigeration to maintain spacing under load.
- Serviceability – Enables technicians to achieve OEM-specified tolerances during routine maintenance and repairs, supporting uptime.
- Fleet Efficiency – Proper alignment helps maintain fuel-efficient cooling and reliable temperature control across operations.
Product Details
The Thermo King Shim .01 773158 is a precision shim used to adjust spacing and alignment in Thermo King refrigeration assemblies. Technicians install it where small, accurate spacing corrections are required to restore OEM clearances and support reliable mechanical operation. Use per Thermo King service instructions for intended placement and torque specifications.
Efficiency & Sustainability
Maintaining correct component alignment with OEM shims supports efficient heat transfer and consistent temperature control in refrigerated transport. Properly maintained systems reduce cycling and fuel consumption, contributing to lower operating emissions and improved uptime. This component supports Thermo King service practices for platforms such as Precedent and Smart Reefer configurations when installed according to OEM guidance.
Installation & Maintenance Tips
Install the shim during scheduled service or when measurements indicate clearance adjustment. Use OEM fasteners and torque values to secure components and prevent movement. Inspect shim placement during routine maintenance intervals and replace if deformation or corrosion appears. Follow Thermo King service manuals for step-by-step procedures.
Real-World Applications
The Thermo King Shim .01 773158 is ideal for reefer trailers, refrigerated straight trucks, and multi-temperature transport units where precise mechanical spacing extends component life and maintains temperature control. It performs in fleet service across regional routes and long-haul operations.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information via the contact page or call the service department for confirmation.
Frequently Asked Questions
Q: Is this shim compatible with Thermo King Precedent units?
A: Yes. The Thermo King Shim .01 773158 fits Thermo King assemblies where the OEM part number is specified; follow Thermo King service documentation for exact placement.
Q: When should a technician install this shim?
A: Install during service when measured clearances fall outside OEM tolerance or when reassembling components that require precise spacing to restore correct alignment.
Q: Does installing this shim affect temperature control?
A: Proper spacing and alignment help maintain reliable temperature control by reducing vibration and wear, which supports consistent system operation and fuel-efficient cooling.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.