Thermo King Tinnerman Hose & Conduit Clamp 5/16 x 1/2 552240
Official OEM Thermo King parts catalog entry for the Thermo King Tinnerman Clamp 552240 5/16 x 1/2, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Tinnerman Clamp 552240 5/16 x 1/2 delivers OEM-grade retention for Thermo King refrigeration system hose and conduit assemblies, ensuring secure connections that support dependable temperature control across transport refrigeration operations.
This clamp provides precise, reliable holding power for reefer trailers and refrigerated trucks. West Texas Thermo King offers this component to fleets in Amarillo, Lubbock, Odessa and throughout the Permian Basin to maximize uptime and protect temperature-sensitive cargo.
Key Features & Customer Benefits
- Exact Part Number 552240 – Ensures correct OEM replacement for Thermo King service procedures and parts tracking.
- Tinnerman Clamp Design – Delivers consistent retention force for hoses, conduits, and small-diameter tubing used in transport refrigeration.
- Compact 5/16 x 1/2 Size – Suits small hose and tubing runs where space is limited while maintaining secure fitment.
- Low Profile – Reduces interference in tight assemblies and supports clean routing on Precedent and similar mounting architectures.
- Lightweight – Minimal added mass helps maintain fuel-efficient cooling and reduces wear on bracket mounts over time.
- Durability – Designed for repeated service intervals and inspection cycles to support fleet reliability and lower total cost of ownership.
Product Details
| Part Number | 552240 |
| Product | Thermo King Tinnerman Clamp 5/16 x 1/2 |
| Typical Use | Hose and conduit retention for transport refrigeration assemblies |
| Approximate Weight | 0.01 kg |
Efficiency & Sustainability
This OEM clamp supports efficient, reliable temperature control by maintaining secure coolant and control line routing. Properly retained lines reduce leak risk and service downtime, contributing to fuel-efficient cooling across Thermo King units and helping fleets meet regulatory and sustainability objectives such as CARB Evergreen when OEM components are used within certified service programs.
Installation & Maintenance Tips
Install using OEM mounting points and ensure the clamp engages the hose or conduit without pinching or over-compression. Inspect clamps during routine service intervals and replace any item showing deformation, corrosion, or loss of retention force. Use OEM clamps for secure fitment and consistent service life.
Real-World Applications
The Thermo King Tinnerman Clamp 552240 5/16 x 1/2 is ideal for reefer trailers, refrigerated truck units, and stationary transport refrigeration systems where small-diameter hoses and wiring require reliable retention. Technicians use this clamp across preventive maintenance and field repairs to preserve temperature control and cargo integrity.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information at https://www.trailerservicesofwesttexas.com/contact or contact the service department for confirmation.
Frequently Asked Questions
Q: Is this clamp compatible with Thermo King Precedent units?
A: Yes. The clamp provides secure hose and conduit retention used across Thermo King transport refrigeration platforms where a 5/16 x 1/2 retention is specified.
Q: How often should clamps be inspected during fleet maintenance?
A: Inspect clamps during scheduled preventive maintenance intervals and any time a line or bracket is serviced. Replace clamps that show deformation or reduced retention.
Q: Can technicians install this clamp in the field?
A: Yes. The clamp is designed for field installation using standard Thermo King service procedures and common hand tools while following OEM torque and routing guidelines.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King Tinnerman Clamp 552240 5/16 x 1/2, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Tinnerman Clamp 552240 5/16 x 1/2 delivers OEM-grade retention for Thermo King refrigeration system hose and conduit assemblies, ensuring secure connections that support dependable temperature control across transport refrigeration operations.
This clamp provides precise, reliable holding power for reefer trailers and refrigerated trucks. West Texas Thermo King offers this component to fleets in Amarillo, Lubbock, Odessa and throughout the Permian Basin to maximize uptime and protect temperature-sensitive cargo.
Key Features & Customer Benefits
- Exact Part Number 552240 – Ensures correct OEM replacement for Thermo King service procedures and parts tracking.
- Tinnerman Clamp Design – Delivers consistent retention force for hoses, conduits, and small-diameter tubing used in transport refrigeration.
- Compact 5/16 x 1/2 Size – Suits small hose and tubing runs where space is limited while maintaining secure fitment.
- Low Profile – Reduces interference in tight assemblies and supports clean routing on Precedent and similar mounting architectures.
- Lightweight – Minimal added mass helps maintain fuel-efficient cooling and reduces wear on bracket mounts over time.
- Durability – Designed for repeated service intervals and inspection cycles to support fleet reliability and lower total cost of ownership.
Product Details
| Part Number | 552240 |
| Product | Thermo King Tinnerman Clamp 5/16 x 1/2 |
| Typical Use | Hose and conduit retention for transport refrigeration assemblies |
| Approximate Weight | 0.01 kg |
Efficiency & Sustainability
This OEM clamp supports efficient, reliable temperature control by maintaining secure coolant and control line routing. Properly retained lines reduce leak risk and service downtime, contributing to fuel-efficient cooling across Thermo King units and helping fleets meet regulatory and sustainability objectives such as CARB Evergreen when OEM components are used within certified service programs.
Installation & Maintenance Tips
Install using OEM mounting points and ensure the clamp engages the hose or conduit without pinching or over-compression. Inspect clamps during routine service intervals and replace any item showing deformation, corrosion, or loss of retention force. Use OEM clamps for secure fitment and consistent service life.
Real-World Applications
The Thermo King Tinnerman Clamp 552240 5/16 x 1/2 is ideal for reefer trailers, refrigerated truck units, and stationary transport refrigeration systems where small-diameter hoses and wiring require reliable retention. Technicians use this clamp across preventive maintenance and field repairs to preserve temperature control and cargo integrity.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, contact us for warranty information at https://www.trailerservicesofwesttexas.com/contact or contact the service department for confirmation.
Frequently Asked Questions
Q: Is this clamp compatible with Thermo King Precedent units?
A: Yes. The clamp provides secure hose and conduit retention used across Thermo King transport refrigeration platforms where a 5/16 x 1/2 retention is specified.
Q: How often should clamps be inspected during fleet maintenance?
A: Inspect clamps during scheduled preventive maintenance intervals and any time a line or bracket is serviced. Replace clamps that show deformation or reduced retention.
Q: Can technicians install this clamp in the field?
A: Yes. The clamp is designed for field installation using standard Thermo King service procedures and common hand tools while following OEM torque and routing guidelines.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.