Official OEM Thermo King parts catalog entry for the Jumper Tripac HMI 047215, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Jumper Tripac HMI 047215 supports seamless communication and control for Thermo King refrigeration systems, enabling precise temperature control and dependable operation across transport refrigeration and reefer trailer applications.
The Jumper Tripac HMI 047215 serves as a critical plug-and-play connection for TriPac HMI interfaces, engineered to maintain reliable signal transmission between the Human Machine Interface and base controllers. West Texas Thermo King specifies this OEM component for fleets that require uptime, dependable diagnostics, and consistent temperature regulation in demanding West Texas and Permian Basin operations.
The Jumper Tripac HMI 047215 is an OEM jumper/connectivity component used with Thermo King TriPac HMI assemblies. It supports secure electrical and data connections between the HMI module and the vehicle’s refrigeration control network. As a certified Thermo King part, it integrates with TriPac HMI interfaces to support operator input, mode selection, and real-time status monitoring without requiring aftermarket adaptation. For exact fitment and system configuration, reference Thermo King service documentation or consult certified technicians at West Texas Thermo King.
Proper HMI connectivity supports accurate setpoint control and efficient APU operation, which contributes to fuel-efficient cooling and reduced runtime on diesel units. The Jumper Tripac HMI 047215 helps maintain precise temperature control across refrigerated loads, supporting compliance-focused systems such as Smart Reefer and modern Thermo King transport refrigeration platforms that enhance operational efficiency and reduce unnecessary energy consumption.
Install using OEM routing and secure mounting practices to prevent strain on connectors. Inspect jumper connections during scheduled service intervals and confirm secure mating to HMI and controller ports. Replace immediately if pins show corrosion or mechanical damage. Use only Thermo King-approved replacement parts to preserve diagnostic integrity and warranty eligibility.
The Jumper Tripac HMI 047215 installs in refrigerated trucks, reefer trailers, and tractors equipped with TriPac auxiliary power and HMI control systems. It supports sleeper-cab climate controls, in-cab operator interfaces, and APU-managed temperature zones commonly used by regional and long-haul fleets operating in Amarillo, Lubbock, Odessa, and throughout West Texas.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information: contact us or reach the service department directly for confirmation.
Q: Is the Jumper Tripac HMI 047215 compatible with TriPac HMI controls?
A: Yes. The Jumper Tripac HMI 047215 is an OEM connectivity component intended for use with Thermo King TriPac HMI assemblies to preserve accurate control and diagnostics.
Q: How does this jumper support fleet performance?
A: By preserving reliable signal and power connections between the HMI and controller, the jumper reduces unexpected faults and supports consistent temperature control, lowering downtime and maintenance costs.
Q: Can maintenance teams install this jumper during routine service?
A: Yes. Certified technicians install and verify jumper connections as part of standard Thermo King service procedures; follow OEM routing and inspection guidelines.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Jumper Tripac HMI 047215, verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King Jumper Tripac HMI 047215 supports seamless communication and control for Thermo King refrigeration systems, enabling precise temperature control and dependable operation across transport refrigeration and reefer trailer applications.
The Jumper Tripac HMI 047215 serves as a critical plug-and-play connection for TriPac HMI interfaces, engineered to maintain reliable signal transmission between the Human Machine Interface and base controllers. West Texas Thermo King specifies this OEM component for fleets that require uptime, dependable diagnostics, and consistent temperature regulation in demanding West Texas and Permian Basin operations.
The Jumper Tripac HMI 047215 is an OEM jumper/connectivity component used with Thermo King TriPac HMI assemblies. It supports secure electrical and data connections between the HMI module and the vehicle’s refrigeration control network. As a certified Thermo King part, it integrates with TriPac HMI interfaces to support operator input, mode selection, and real-time status monitoring without requiring aftermarket adaptation. For exact fitment and system configuration, reference Thermo King service documentation or consult certified technicians at West Texas Thermo King.
Proper HMI connectivity supports accurate setpoint control and efficient APU operation, which contributes to fuel-efficient cooling and reduced runtime on diesel units. The Jumper Tripac HMI 047215 helps maintain precise temperature control across refrigerated loads, supporting compliance-focused systems such as Smart Reefer and modern Thermo King transport refrigeration platforms that enhance operational efficiency and reduce unnecessary energy consumption.
Install using OEM routing and secure mounting practices to prevent strain on connectors. Inspect jumper connections during scheduled service intervals and confirm secure mating to HMI and controller ports. Replace immediately if pins show corrosion or mechanical damage. Use only Thermo King-approved replacement parts to preserve diagnostic integrity and warranty eligibility.
The Jumper Tripac HMI 047215 installs in refrigerated trucks, reefer trailers, and tractors equipped with TriPac auxiliary power and HMI control systems. It supports sleeper-cab climate controls, in-cab operator interfaces, and APU-managed temperature zones commonly used by regional and long-haul fleets operating in Amarillo, Lubbock, Odessa, and throughout West Texas.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
View all Thermo King PartsBacked by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
For current warranty eligibility or OEM replacement coverage, please contact us for warranty information: contact us or reach the service department directly for confirmation.
Q: Is the Jumper Tripac HMI 047215 compatible with TriPac HMI controls?
A: Yes. The Jumper Tripac HMI 047215 is an OEM connectivity component intended for use with Thermo King TriPac HMI assemblies to preserve accurate control and diagnostics.
Q: How does this jumper support fleet performance?
A: By preserving reliable signal and power connections between the HMI and controller, the jumper reduces unexpected faults and supports consistent temperature control, lowering downtime and maintenance costs.
Q: Can maintenance teams install this jumper during routine service?
A: Yes. Certified technicians install and verify jumper connections as part of standard Thermo King service procedures; follow OEM routing and inspection guidelines.
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
