Thermo King Washer SPL 0.185 in ID Stainless Steel 558782
Official OEM Thermo King parts catalog entry for the Thermo King Washer-SPL 185ID SS (Part 558782), verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King refrigeration system Washer‑SPL 185ID SS (Part 558782) delivers corrosion-resistant, precision spacing and load distribution for temperature-controlled fleets. Engineered as an OEM stainless steel washer, it supports secure fastenings and consistent alignment in transport refrigeration assemblies.
Key Features & Customer Benefits
- Stainless Steel Construction – Ensures corrosion resistance and durability in humid, refrigerated environments for long service life.
- 0.185 in Inner Diameter – Provides a precise fit for mounting hardware that requires a 0.185 inch ID, maintaining alignment and load distribution.
- OEM Specification – Matches Thermo King part requirements for consistent fit and function in Thermo King assemblies when 558782 is specified.
- Low Mass – Lightweight component (approx. 0.01 kg) that avoids adding unnecessary weight while preserving structural integrity.
- Vibration Resistance – Rigid stainless design supports secure fastening in mobile refrigeration equipment subject to vibration.
- Certified Dealership Support – Supplied and validated by West Texas Thermo King, a certified Thermo King dealership, for trustworthy installation guidance and parts expertise.
Product Details
| Part Number | 558782 |
| Product Name | Thermo King Washer‑SPL 185ID SS |
| Material | Stainless Steel (SS) |
| Inner Diameter (ID) | 0.185 in |
| Approximate Weight | 0.01 kg |
| Compatibility | Thermo King assemblies and mounting hardware specifying part 558782 |
Efficiency & Sustainability
This stainless steel washer supports reliable mechanical connections that reduce rework and downtime, improving fleet uptime and operational efficiency. By maintaining secure fastening and correct spacing, the component contributes to effective temperature control and reduces the need for premature replacements, aligning with sustainable fleet maintenance practices and Thermo King service standards such as Smart Reefer SR-4 monitoring where applied.
Installation & Maintenance Tips
Install using specified Thermo King fasteners and recommended torque values. Avoid compressible or non‑OEM materials between mounting surfaces; this stainless washer functions as a rigid spacer to preserve alignment. Inspect washers during scheduled maintenance intervals and replace if mechanical damage or deformation appears. Use OEM clamps and hardware where required for secure fitment.
Real-World Applications
The Washer‑SPL 185ID SS serves as a precision spacer and load-distribution washer in reefer trailers, refrigerated trucks, and other transport refrigeration applications. It supports mounting points on refrigeration units and auxiliary assemblies where a 0.185 in ID stainless washer is specified, helping preserve seal integrity and mechanical alignment under repeated vibration and temperature cycles.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
Contact us for warranty information and direct warranty confirmation at https://www.trailerservicesofwesttexas.com/contact.
Frequently Asked Questions
Q: Is this washer compatible with Thermo King refrigeration units?
A: Yes. The Washer‑SPL 185ID SS (Part 558782) fits Thermo King assemblies where a 0.185 in ID stainless washer is specified and maintains OEM fit and function.
Q: What material and environmental conditions suit this washer?
A: Stainless steel construction resists corrosion and suits humid and refrigerated operating environments common to reefer trailers and transport refrigeration systems.
Q: How often should this washer be inspected?
A: Inspect during scheduled maintenance intervals and service inspections; replace if deformation, cracking, or corrosion compromises fastener function.
Q: Where can fleets in West Texas get installation support?
A: West Texas Thermo King certified technicians provide parts verification and installation support across Amarillo, Lubbock, Odessa, and the Permian Basin.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.
Official OEM Thermo King parts catalog entry for the Thermo King Washer-SPL 185ID SS (Part 558782), verified by PEAK Thermo King and West Texas Thermo King Texas, Utah, Wyoming, Washington, Oregon, serving all of the USA.
Built for Performance: The Thermo King refrigeration system Washer‑SPL 185ID SS (Part 558782) delivers corrosion-resistant, precision spacing and load distribution for temperature-controlled fleets. Engineered as an OEM stainless steel washer, it supports secure fastenings and consistent alignment in transport refrigeration assemblies.
Key Features & Customer Benefits
- Stainless Steel Construction – Ensures corrosion resistance and durability in humid, refrigerated environments for long service life.
- 0.185 in Inner Diameter – Provides a precise fit for mounting hardware that requires a 0.185 inch ID, maintaining alignment and load distribution.
- OEM Specification – Matches Thermo King part requirements for consistent fit and function in Thermo King assemblies when 558782 is specified.
- Low Mass – Lightweight component (approx. 0.01 kg) that avoids adding unnecessary weight while preserving structural integrity.
- Vibration Resistance – Rigid stainless design supports secure fastening in mobile refrigeration equipment subject to vibration.
- Certified Dealership Support – Supplied and validated by West Texas Thermo King, a certified Thermo King dealership, for trustworthy installation guidance and parts expertise.
Product Details
| Part Number | 558782 |
| Product Name | Thermo King Washer‑SPL 185ID SS |
| Material | Stainless Steel (SS) |
| Inner Diameter (ID) | 0.185 in |
| Approximate Weight | 0.01 kg |
| Compatibility | Thermo King assemblies and mounting hardware specifying part 558782 |
Efficiency & Sustainability
This stainless steel washer supports reliable mechanical connections that reduce rework and downtime, improving fleet uptime and operational efficiency. By maintaining secure fastening and correct spacing, the component contributes to effective temperature control and reduces the need for premature replacements, aligning with sustainable fleet maintenance practices and Thermo King service standards such as Smart Reefer SR-4 monitoring where applied.
Installation & Maintenance Tips
Install using specified Thermo King fasteners and recommended torque values. Avoid compressible or non‑OEM materials between mounting surfaces; this stainless washer functions as a rigid spacer to preserve alignment. Inspect washers during scheduled maintenance intervals and replace if mechanical damage or deformation appears. Use OEM clamps and hardware where required for secure fitment.
Real-World Applications
The Washer‑SPL 185ID SS serves as a precision spacer and load-distribution washer in reefer trailers, refrigerated trucks, and other transport refrigeration applications. It supports mounting points on refrigeration units and auxiliary assemblies where a 0.185 in ID stainless washer is specified, helping preserve seal integrity and mechanical alignment under repeated vibration and temperature cycles.
Available for installation and service in Amarillo, Lubbock, Odessa, and throughout West Texas.
Backed by Thermo King’s engineering and supported by certified technicians at West Texas Thermo King, this component delivers lasting performance and uptime assurance for fleet operations.
For product verification or service assistance, call (806) 376-5837.
Contact us for warranty information and direct warranty confirmation at https://www.trailerservicesofwesttexas.com/contact.
Frequently Asked Questions
Q: Is this washer compatible with Thermo King refrigeration units?
A: Yes. The Washer‑SPL 185ID SS (Part 558782) fits Thermo King assemblies where a 0.185 in ID stainless washer is specified and maintains OEM fit and function.
Q: What material and environmental conditions suit this washer?
A: Stainless steel construction resists corrosion and suits humid and refrigerated operating environments common to reefer trailers and transport refrigeration systems.
Q: How often should this washer be inspected?
A: Inspect during scheduled maintenance intervals and service inspections; replace if deformation, cracking, or corrosion compromises fastener function.
Q: Where can fleets in West Texas get installation support?
A: West Texas Thermo King certified technicians provide parts verification and installation support across Amarillo, Lubbock, Odessa, and the Permian Basin.
Related Resources
Ask about fleet-wide parts programs through West Texas Thermo King.
Produced by a certified Thermo King dealership, West Texas Thermo King | a Division of PEAK Industrial. Servicing fleets across Amarillo, Lubbock, and Odessa.